AsiaHorse White Vertical GPU Mounting Bracket Kit – PCIe 4.0 x16 200mm Riser Cable, 3-Slot Steel Mount, Anti-Vibration Pads, Screws & Screwdriver

ALI-SHK-PCIE5.0-WH

ASIHORSE 16AWG PCI-e 5.0 PSU CABLE EXTENSION 600W 12+4 PIN MALE TO PCIE 3×8 PIN(6+2)FEMALE

AsiaHorse White Vertical GPU Mounting Bracket Kit – PCIe 4.0 x16 200mm Riser Cable, 3-Slot Steel Mount, Anti-Vibration Pads, Screws & Screwdriver

---

GENERATE AN AI IMAGE

Layout

• Create an exact 2048 × 2048-pixel, perfect 1:1 square high-conversion gaming product-profile image using the supplied raw AsiaHorse kit photograph.
• Make the complete mounting kit the dominant foreground hero, occupying approximately 60–66% of the canvas.
• Clearly show the white steel 3-slot bracket, flexible PCIe 4.0 x16 riser cable, three foam pads, seven screws, and screwdriver without hiding or duplicating components.
• Separate the foreground kit, midground installed vertical-GPU demonstration, and background surreal gaming environment.
• Place the ASIAHORSE logo at top-left and center “Vertical GPU Mounting Kit — PCIe 4.0 x16” at the top in large extruded 3D typography.

Product Presentation

• Preserve the exact white bracket geometry, slot openings, screw positions, riser PCB ends, white ribbon sections, foam pads, and supplied hardware.
• Render every product edge razor-sharp, especially where white metal meets the light background.
• Show a secondary generic high-end graphics card installed vertically in the midground only to demonstrate the kit’s factual post-sale function; never imply that the GPU is included.
• Clearly visualize the riser traveling from a motherboard PCIe slot to the vertical GPU connector.
• Do not invent RGB lighting, power cables, controllers, or additional accessories.

Artistically Distinct and Detailed Background

• Create a surreal “GPU Throne Rotation Chamber” inside a futuristic glass-sided gaming PC: the motherboard remains horizontal while the graphics card has been physically rotated upright by luminous mechanical structures inspired by the bracket.
• In the far background, position a menacing armored gaming villain seated sideways on a translucent architectural beam, watching the GPU rotate into vertical display position while one crystalline hand redirects flowing PCIe data streams toward it.
• Keep the villain secondary and partially translucent; the kit must remain unmistakably dominant.
• Use a predominantly extreme high-luster pearlescent white environment, but place saturated translucent icy-cyan, sapphire, violet, and iridescent-magenta glass fields directly behind the white bracket to guarantee strong edge separation.
• Use only opalescent high-gloss material and thick dichroic glass as the two principal textures.
• Keep graphite and black strictly minimal; create the dark gaming spirit through threatening architecture, sharp silhouettes, posture, and narrative tension instead of dark smog.

Icons — Bullet Listed

• PCIe 4.0 x16
• 200mm Riser
• Vertical GPU Mount
• 3-Slot Steel Bracket
• 3 Foam Pads
• 7 Screws + Tool
• CRITICAL DIRECTIVE [STRICT] The Icons MUST Have different shapes depending on the specific content of the icon
• Use hollowed-out esports 3D icons with large, bold, ultra-readable internal typography.

Output Requirements

• Exact 2048 × 2048 pixels, perfect 1:1 square.
• Keep product, title, logo, icons, villain, GPU demonstration, and all edges fully inside safe margins.
• Add discreetly at the bottom: “Infographics Created by the Expert Zone Team”.

Constraints

• No pedestal, stage, banner, poster composition, cropped preview, graphite fog, generic chrome, excessive matte surfaces, or clutter.
• Never make the demonstration GPU larger or more visually dominant than the AsiaHorse kit.
• Never depict the riser cable as a GPU power cable.
• Before output, evaluate “How does this image fare as a product-profile image?” and automatically correct inaccurate mounting, weak white-product separation, illegible icons, or insufficient product dominance.